QCVN 02:2020/BCT
NATIONAL TECHNICAL REGULATION ON MERCURY CONTENT IN FLUORESCENT LAMP
Foreword
QCVN 02:2020/BCT is developed by the Drafting Team, submitted by the Vietnam Chemicals Agency for approval, appraised by the Ministry of Science and Technology and promulgated together with the Circular No. 45/2020/TT-BCT dated December 21, 2020 by the Minister of Industry and Trade.
NATIONAL TECHNICAL REGULATION ON MERCURY CONTENT IN FLUORESCENT LAMPS
I. General
1. Scope
This Regulation provides for technical requirements, test methods and regulatory requirements for mercury content in fluorescent lamps specified in the Appendix hereto.
2. Regulated entities
This Regulation applies to producers, importers and traders of fluorescent lamps containing mercury specified in the Appendix hereto, regulatory bodies and other related organizations and individuals.
3. Definitions
For the purposes of this Regulation, the terms below shall be construed as follows:
3.1. “maximum limit of mercury” means the maximum permissible amount of mercury in a fluorescent lamp.
3.2. “fluorescent lamp” means a low pressure mercury-type discharge lamp in which most of the light is emitted by one or more layers of phosphorous material excited by the ultraviolet radiation created by the discharge.
3.3. “compact fluorescent lamp (CFL)” means a low-pressure mercury-vapour gas discharge lamp which has an integrated cap and starter.
3.4. “linear fluorescent lamp (LFL)” means a fluorescent lamp with a long tube.
3.5. “cold cathode fluorescent lamp for electronic displays (CCFL)” means a small diameter fluorescent lamp having cold cathode in the lamp in which most of the light is emitted by the excitation of phosphors in discharge tube and used as backlighting in LCD.
3.6. “external electrode fluorescent lamp (EEFL)” means a small diameter fluorescent lamp having cold cathode attached outside the lamp in which most of the light is emitted by the excitation of phosphors in discharge tube and used as backlighting in LCD.
3.7. IEC stands for International Electrotechnical Commission which was established in 1906.
II. Technical requirements
1. Normative references
Minamata Convention on Mercury in force as of September 21, 2017 to which the Government of the Socialist Republic of Vietnam became a signatory on October 11, 2013.
1.2. TCVN 10172:2013 (IEC 62554:2011) Sample preparation for measurement of mercury level in fluorescent lamps
1.3. IEC 62321-4:2017 (Determination of certain substances in electrotechnical Products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS).
2. Technical requirements
Permissible limits of mercury content in fluorescent lamps are specified in Table 1.
Table 1 - Limits of mercury content in fluorescent lamps
No. | Type of fluorescent lamp | Maximum limit (mg/lamp) | Test method |
Để xem đầy đủ nội dung Tiêu chuẩn/Quy chuẩn và sử dụng toàn bộ tiện ích của Hệ Thống Pháp Luật vui lòng lựa chọn và đăng ký gói cước.
Nếu bạn là thành viên. Vui lòng ĐĂNG NHẬP để tiếp tục.
National technical regulation QCVN 02A:2020/BCT on Mercury content in fluorescent lamps
- Số hiệu: QCVN02A:2020/BCT
- Loại văn bản: Quy chuẩn
- Ngày ban hành: 21/12/2020
- Nơi ban hành: Bộ Công thương
- Người ký: ***
- Ngày công báo: Đang cập nhật
- Số công báo: Đang cập nhật
- Ngày hiệu lực: 01/07/2022
- Tình trạng hiệu lực: Còn hiệu lực