Quyết định số 1440/QĐ-TTg được Thủ tướng Chính phủ ban hành ngày 06 tháng 10 năm 2008 phê duyệt Quy hoạch xây dựng khu xử lý chất thải rắn ba vùng kinh tế trọng điểm Bắc Bộ, miền Trung và phía Nam đến năm 2020. Đây là văn bản pháp lý quan trọng nhằm định hướng chiến lược xây dựng hệ thống hạ tầng kỹ thuật xử lý chất thải rắn đồng bộ, hiện đại, góp phần bảo vệ môi trường và phát triển kinh tế - xã hội bền vững tại các vùng kinh tế động lực của cả nước.
Phạm vi áp dụng của quy hoạch bao gồm toàn bộ ranh giới hành chính của các tỉnh, thành phố trực thuộc Trung ương thuộc ba vùng kinh tế trọng điểm Bắc Bộ, miền Trung và phía Nam. Đối tượng áp dụng là các cơ quan quản lý nhà nước, các tổ chức, cá nhân trong và ngoài nước tham gia vào các hoạt động liên quan đến quy hoạch, lập dự án đầu tư, xây dựng, quản lý và vận hành các cơ sở xử lý chất thải rắn trên địa bàn các vùng kinh tế trọng điểm này.
- Quan điểm và mục tiêu quy hoạch phát triển hệ thống xử lý chất thải rắn- Xây dựng hệ thống quản lý chất thải rắn đồng bộ từ khâu phân loại, thu gom, vận chuyển đến xử lý, trong đó ưu tiên các giải pháp tái chế, tái sử dụng và hạn chế tối đa việc chôn lấp trực tiếp nhằm tiết kiệm tài nguyên đất và bảo vệ nguồn nước.
- Xác định cụ thể vị trí, quy mô và công nghệ của các khu xử lý chất thải rắn cấp vùng liên tỉnh, liên đô thị nhằm tối ưu hóa hiệu quả đầu tư và vận hành.
- Đến năm 2020, phấn đấu thu gom và xử lý đạt tỷ lệ 90% đối với chất thải rắn sinh hoạt đô thị, 100% đối với chất thải nguy hại công nghiệp và y tế tại các vùng kinh tế trọng điểm.
- Quy hoạch xác định các khu xử lý chất thải rắn liên tỉnh quy mô lớn để tiếp nhận và xử lý chất thải cho các đô thị lớn và khu công nghiệp tập trung tại Hà Nội, Hải Phòng, Quảng Ninh, Hải Dương, Hưng Yên, Bắc Ninh và Vĩnh Phúc.
- Ưu tiên đầu tư xây dựng các khu xử lý chất thải rắn vùng liên tỉnh có công nghệ hiện đại, kết hợp giữa xử lý chất thải sinh hoạt và chất thải công nghiệp nguy hại.
- Phân vùng thu gom và vận chuyển hợp lý để giảm thiểu chi phí vận chuyển và tránh gây ô nhiễm môi trường trên các tuyến quốc lộ, tỉnh lộ.
- Phạm vi quy hoạch bao gồm các tỉnh Thừa Thiên Huế, Đà Nẵng, Quảng Nam, Quảng Ngãi và Bình Định.
- Xây dựng các khu xử lý chất thải rắn cấp vùng đáp ứng nhu cầu xử lý chất thải sinh hoạt đô thị, chất thải từ các khu kinh tế ven biển (như Chân Mây - Lăng Cô, Chu Lai, Dung Quất, Nhơn Hội) và các khu công nghiệp tập trung.
- Lựa chọn địa điểm xây dựng tại các vùng trung du, đồi núi có điều kiện địa chất ổn định, cách xa các khu dân cư và các nguồn nước ngọt sinh hoạt.
- Phạm vi quy hoạch bao gồm Thành phố Hồ Chí Minh, Đồng Nai, Bình Dương, Bà Rịa - Vũng Tàu, Tây Ninh, Bình Phước, Long An và Tiền Giang.
- Tập trung đầu tư các khu liên hợp xử lý chất thải rắn quy mô lớn, đa chức năng, áp dụng công nghệ tiên tiến để xử lý khối lượng chất thải cực lớn từ các đô thị cực đại và các khu công nghiệp, khu chế xuất.
- Phân bổ hợp lý các khu xử lý chất thải nguy hại liên tỉnh nhằm giải quyết triệt để nguồn thải nguy hại phát sinh từ hoạt động sản xuất công nghiệp của vùng.
- Khuyến khích áp dụng các công nghệ xử lý hiện đại như: công nghệ chế biến phân hữu cơ (compost), công nghệ thiêu đốt thu hồi năng lượng (phát điện), công nghệ tái chế nhựa, kim loại, giấy.
- Hạn chế tối đa việc áp dụng công nghệ chôn lấp trực tiếp, chỉ cho phép chôn lấp đối với tro xỉ sau thiêu đốt hoặc các loại chất thải trơ không thể tái chế.
- Các thiết bị, dây chuyền công nghệ nhập khẩu phải đảm bảo các tiêu chuẩn môi trường tiên tiến; đồng thời khuyến khích việc nội địa hóa các thiết bị xử lý để giảm giá thành đầu tư.
- Giải pháp về cơ chế, chính sách: Ban hành các chính sách ưu đãi về đất đai, thuế thu nhập doanh nghiệp, thuế nhập khẩu thiết bị và hỗ trợ vay vốn ưu đãi đối với các dự án đầu tư xây dựng khu xử lý chất thải rắn.
- Giải pháp về nguồn vốn: Đa dạng hóa nguồn vốn đầu tư, kết hợp giữa ngân sách nhà nước, vốn ODA, vốn tín dụng ưu đãi và đặc biệt là đẩy mạnh xã hội hóa, thu hút vốn đầu tư từ các thành phần kinh tế tư nhân và nước ngoài dưới các hình thức PPP, BOT, BOO.
- Giải pháp về khoa học và công nghệ: Tăng cường nghiên cứu, chuyển giao và ứng dụng các công nghệ xử lý chất thải rắn phù hợp với điều kiện thực tế của Việt Nam; đào tạo nguồn nhân lực quản lý và vận hành chuyên nghiệp.
- Giải pháp về quản lý và nâng cao nhận thức: Đẩy mạnh chương trình phân loại rác thải tại nguồn; tăng cường công tác thanh tra, kiểm tra và giám sát môi trường đối với các cơ sở xử lý chất thải.
Quyết định số 1440/QĐ-TTg có hiệu lực thi hành kể từ ngày ký ban hành (06 tháng 10 năm 2008). Các Bộ trưởng, Thủ trưởng cơ quan ngang Bộ, Thủ trưởng cơ quan thuộc Chính phủ, Chủ tịch Ủy ban nhân dân các tỉnh, thành phố trực thuộc Trung ương trong vùng quy hoạch chịu trách nhiệm thi hành Quyết định này.
Để sử dụng toàn bộ tiện ích nâng cao của Hệ Thống Pháp Luật vui lòng lựa chọn và đăng ký gói cước.
| THE PRIME MINISTER | SOCIALIST REPUBLIC OF VIET NAM |
| No. 1440/QD-TTg | Hanoi, October 6,2008 |
DECISION
APPROVING THE PLANNING ON CONSTRUCTION OF SOLID WASTE TREATMENT FACILITIES IN THREE NORTHERN, CENTRAL VIETNAM AND SOUTHERN KEY ECONOMIC REGIONS UP TO 2020
THE PRIME MINISTER
Pursuant to the December 25, 2001 Law on Organization of the Government;
At the proposal of the Minister of Construction in Report No. 67/TTr-BXD of July 17, 2008, approving the planning on construction of solid waste treatment facilities in three northern, central Vietnam and southern key economic regions up to 2020,
DECIDES:
Article 1.- To approve the Planning on construction of solid waste treatment centers in three northern, central Vietnam and southern key economic regions up to 2020.
1. Scope of the Planning
The area under the Planning on construction of solid waste treatment centers in three northern, central Vietnam and southern key economic zone encompasses the following provinces and cities:
...
...
...
b/ In the Central Vietnam key economic region: Da Nang, ThuaThien - Hue, Quang Nam, Quang Ngai and Binh Dinh.
c/ In the southern key economic region: Ho Chi Minh City and Dong Nai, Ba Ria-Vung Tau, Binh Duong, Tay Ninh, Binh Phuoc, Long An and Tien Giang provinces.
2. Target objects of the Planning
Urban daily-life and industrial solid wastes.
3. Objectives of the Planning
- To build a network of regional solid waste treatment centers to thoroughly treat, recycle or reuse wastes, restrict waste landfill and increase the effectiveness in treatment of solid wastes, especially hazardous solid wastes.
- To socialize the work of solid waste management. To mobilize various resources for investment in solid waste management and treatment facilities.
- To improve the effectiveness of state management, raise the quality of solid waste treatment, improve the quality of the living environment to meet the increasing demand of the society, and create a firm foundation for the successful implementation of the Strategy on management of solid wastes in Vietnam's urban centers and industrial parks up to 2020.
- To contribute to ensuring the stable and sustainable development of urban centers and industrial parks in Vietnam.
...
...
...
- To formulate plannings on inter-provincial and provincial solid waste treatment centers in conformity with socio-economic development plannings, construction plannings and other relevant plannings.
- To build common-use single daily-life solid waste treatment centers for adjoining urban centers. To formulate plannings on the construction of inter-provincial centers for treatment of hazardous industrial solid wastes.
- To encourage all economic sectors to invest in the construction of treatment centers and the management of solid waste collection and treatment activities.
- To prioritize the application of accredited domestic technologies to recycle or reuse solid wastes, restricting waste landfill, with a view to thoroughly treating environmental pollution and increasing land use efficiency.
5. Contents of the Planning:
a/ Solid waste treatment technologies
- Technologies for treatment of urban solid wastes:
On the basis of local practical conditions, to select and apply appropriate solid waste treatment technologies:
+ Accredited locally developed technologies or foreign technologies.
...
...
...
+ Processing compost: To be applied in regions with limited land areas and a large volume of organic solid wastes.
+ Recycling: To be applied to garbage which can be usable after being technically processed.
+ Incineration: To be applied to flammable and hazardous garbage of low moisture.
- Technologies for treatment of industrial solid wastes:
In order to thoroughly treat industrial solid wastes, especially hazardous wastes, it is necessary to combine different technological processes such as incineration, hygienic landfill and other supporting technologies.
b/ Planning on regional solid waste treatment centers in three key economic regions
The Planning on regional solid waste treatment centers in three key economic regions identifies seven inter-provincial solid waste treatment centers as follows:
No.
Name of treatment center
...
...
...
Area
Scope of service
I
Northern key economic zone
1
Nam Son treatment facility
Nam Son commune, Soc Son district. Hanoi
140-160 hectares
- Industrial solid wastes of Hanoi city and Vinh Phuc. Bac Ninh and Hung Yen provinces
...
...
...
2
Son Duong treatment facility
Son Duong commune, Hoanh Bo district, Quang Ninh province
100 hectares
- Industrial solid wastes of Quang Ninh province. Hai Phong city and Hai Duong province
- Daily-life solid wastes of Quang Ninh province
II
Central Vietnam key economic region
1
...
...
...
Huong Van commune, Huong Tra district, Thua Thien-Hue province
40 hectares
- Industrial solid wastes of Thua Thien-Hue province and Da Nang city;
- Daily-life solid wastes of Thua Thien-Hue city
2
Binh Nguyen treatment facility
Binh Nguyen commune, Binh Son district, Quang Ngai province
70 hectares
- Industrial solid wastes of Quang Nam and Quang Ngai provinces;
...
...
...
3
Cat Nhon treatment facility
Cat Nhon commune, Phu Cat district, Binh Dinh province
70 hectares
- Industrial solid wastes of Binh Dinh provinces and some provinces south and west of Binh Dinh province
- Daily-life solid wastes of Binh Dinh province
III
Southern key economic region
1
...
...
...
Tan Thanh commune, Thu Thua district. Long An province
1,760 hectares
Daily-life solid wastes and industrial solid wastes of Long An province and Ho Chi Minh city
2
Northwest Cu Chi hazardous industrial solid waste treatment facility
Cu Chi district, Ho Chi Minh city
100 hectares
- Hazardous industrial solid wastes of Ho Chi Minh city and Binh Duong and Tay Ninh provinces
6. Investment expense estimates
...
...
...
The total investment capital demand in the construction of 7 inter-provincial solid waste treatment facilities is VND 9,683 billion (equivalent to USD 598 million).
The investment capital demand for the construction of each regional solid waste treatment facility is specified as follows:
- Nam Son treatment facility: USD 160 million.
- Son Duong treatment facility: USD 68 million.
- Huong Van treatment facility: USD 30.5 million.
- Binh Nguyen treatment facilitv: USD 65.5 million.
- Cat Nhon treatment facility: USD 55 million.
- Tan Thanh treatment facilitv: USD 190 million.
- Northwestern Cu Chi treatment facility: USD 29 million.
...
...
...
b/ Investment capital sources:
Investment capital sources for the construction of solid waste treatment facilities and auxiliary include:
- Central budget:
- Local budget;
- Foreign aid;
- Long-term loans;
- Other lawful sources.
Article 2.- Mechanisms and policies
In order to make coordinated investment in regional solid waste treatment centers and ensure conformity with environmental hygiene standards.
...
...
...
- Exemption from land use levy;
- Provision of financial supports by the Slate for ground clearance and construction of projects' outside-fence facilities.
-Application of the highest preferential (value-added, business income, etc.) tax rates under current regulations to enterprises and investors;
- Provision of concessional loans by the Bank for Development of Vietnam to enterprises with assets formed under projects as loan guaranty;
- Payment of solid waste treatment expenses to enterprises and investors so as to help them to recover and repay loans, pay management and operation expenses, accumulate capital for development re-investment and acquire reasonable profits.
Article 3.- Organization of implementation
1. The Ministry of Construction
- To manage the Planning on construction of solid waste treatment facilities in three key economic regions already approved by the Prime Minister.
- To assume the prime responsibility for, and coordinate with the Ministry of Natural Resources and Environment and the Ministry of Science and Technology in, assessing and accrediting locally developed solid waste treatment technologies.
...
...
...
- To assume the prime responsibility for selecting investors for projects on the construction of inter-provincial solid waste treatment facilities and direct the projects' implementation.
- To assume the prime responsibility for. and coordinate with relevant agencies in, guiding localities in three key economic regions in implementing programs on investment in garbage treatment plants that apply accredited locally developed technologies.
2. The Ministry of Planning and Investment
To allocate budget capital for approved investment projects on the construction of inter-provincial solid waste treatment centers.
3. The Ministry of Finance
To coordinate with the Ministry of Planning and Investment in allocating budget capital for approved investment projects on the construction of inter-provincial solid waste treatment centers.
4. The Ministry of Science and technology
To coordinate with the Ministrv of Construction in evaluating and accrediting new locally developed solid waste treatment technologies.
5. The Ministry of Natural Resources and Environment
...
...
...
- To supervise, examine and evaluate the conformity with prescribed environmental standards of built solid waste treatment facilities.
6. People's Committees of provinces and centrally run cities in key economic regions:
- To scrutinize and revise plannings on construction of urban centers and rural residential quarters and specialized construction plannings in line with the Planning on construction of solid waste treatment facilities in three key economic regions approved by the Prime Minister.
- To direct the implementation of projects on the construction of solid waste treatment facilities in their localities in accordance with current regulations.
Article 4.-This Decision takes effect 15 days after the date of its signing.
The Minister of Construction, concerned ministers, presidents of People's Committees of provinces and centrally run cities in three key economic regions, and heads of concerned agencies shall implement this Decision.
FOR THE PRIME MINISTER
DEPUTY PRIME MINISTER
Hoang Trung Hai
Decision No. 1440/QD-TTg of October 6,2008, approving the planning on construction of solid waste treatment facilities in three northern, central Vietnam and southern key economic regions up to 2020.
- Số hiệu: 1440/QD-TTg
- Loại văn bản: Quyết định
- Ngày ban hành: 06/10/2008
- Nơi ban hành: Thủ tướng Chính phủ
- Người ký: Hoàng Trung Hải
- Ngày công báo: Đang cập nhật
- Số công báo: Đang cập nhật
- Ngày hiệu lực: 21/10/2008
- Tình trạng hiệu lực: Kiểm tra
