Để sử dụng toàn bộ tiện ích nâng cao của Hệ Thống Pháp Luật vui lòng lựa chọn và đăng ký gói cước.
Nếu bạn là thành viên. Vui lòng ĐĂNG NHẬP để tiếp tục.
| THE MINISTRY OF FINANCE | SOCIALIST REPUBLIC OF VIET NAM |
| No: 12/2003/QD-BTC | Hanoi , January 24, 2003 |
THE MINISTER OF FINANCE
Pursuant to the Government's Decree No. 86/2002/ND-CP of November 5, 2002 defining the functions, tasks, powers and organizational structure of the ministries and ministerial-level agencies;
Pursuant to the Government's Decree No. 178/CP of October 28, 1994 on the tasks, powers and organizational structure of the Ministry of Finance;
Pursuant to August 28, 2001 Ordinance No. 38/2001/PL-UBTVQH on Charges and Fees; pursuant to the Government's Decree No. 57/2002/ND-CP of June 3, 2002 detailing the implementation of the Ordinance on Charges and Fees;
At the proposals of the Ministry of Communications and Transport in Official Dispatch No. 4283/GTVT-TCKT of November 13, 2002 and of the director of the Enterprise Finance Department,
DECIDES:
1. Charges for approval of the designs of equipment and supplies.
2. Charges for inspection of the quality of products.
...
...
...
4. Charges for inspection of the quality of containers.
5. Charges for inspection of the quality of lifting equipment;
6. Charges for inspection of the quality of boilers and pressure equipment.
7. Charges for inspection of equipment and supplies by non-destruction methods.
8. Charges for examination of welders and non-destruction testers.
Article 5.- A number of terms used in this Table of Charges are construed as follows:
...
...
...
2. Model products are products made for the first time to satisfy the requirements of current technical norms and standards, serving as a basis for permitted mass production.
3. Mass-manufactured products are products manufactured in lots compatible with the approved model products.
4. Charge calculation prices are selling prices for home-made products or buying prices or imported products.
FOR THE MINISTER OF FINANCE
VICE MINISTER
Tran Van Ta
...
...
...
I. CHARGES FOR APPROVAL OF THE DESIGNS OF EQUIPMENT AND SUPPLIES
1. The charge rates for approval of the designs of equipment or supplies shall be calculated in % of the costs of the designs of equipment or supplies specified in Table 1.
Table 1
Ordinal number
Cost of design (in VND million)
Charge rates (%)
1
Up to 10
6.0
...
...
...
Between over 10 and 50
5.5
3
Between over 50 and 100
5.0
4
Between over 100 and 200
4.5
5
...
...
...
4.0
2. The charge rates for approval of the transformation or repair designs shall be equal to 70% of those specified in Table 1.
3. The charge rates for duplication of the approval decisions or approval of modifications of the approved designs shall be equal to 30% of those specified in Table 1.
II. CHARGES FOR INSPECTION OF THE QUALITY OF PRODUCTS
The charge rates for inspection of the quality of products shall be calculated in percentage of the manufacture costs; the prices of product lots or the buying prices of imported products specified in Table 2.
Table 2
Ordinal number
Inspected objects
...
...
...
Minimum (in VND thousand) charge
1
Model or single products
1.0
500
2
Mass-manufactured or imported products
0.5
300
...
...
...
The charge rates for inspection and certification of laboratories, testing stations or establishments manufacturing materials and products are specified in Table 3.
Table 3
Inspected objects
Charge rates (in VND thousand)
First-time inspection
Periodical inspection
Laboratories, testing stations and establishments manufacturing materials and products
2,000
...
...
...
IV. CHARGES FOR INSPECTION OF THE QUALITY OF CONTAINERS
1. The charge rates for inspection of the quality of 20-feet containers are specified in Table 4
Table 4
Ordinal number
20-feet containers
Charge rates (in VND thousand)
1
For dry merchandise
...
...
...
2
Isothermal containers for liquid merchandise, and containers of other kinds
250
2. The charge rates for inspection of 40-feet containers shall be the charge rates specified in Table 4 multiplied by co-efficient 1.5.
V. CHARGES FOR INSPECTION OF THE QUALITY OF LIFTING EQUIPMENT
1. The charge rates for first-time and irregular inspections are specified in Table 5.
Table 5
Ordinal number
...
...
...
Charge rates (in VND thousand)
1
Under 1
500
2
Between 1 and 3
600
3
Between over 3 and 5
...
...
...
4
Between over 5 and 7.5
1,000
5
Between over 7.5 and 10
1,500
6
Between over 10 and 15
1,700
...
...
...
Between over 15 and 20
2,000
8
Between over 20 and 30
2,500
9
Between over 30 and 50
2,700
10
...
...
...
3,000
11
Between over 75 and 100
3,500
12
Over 100
4,000
2. The charge rates for periodical inspection shall be equal to 50% of those specified in Table 5
...
...
...
The charge rates for inspection of the quality of boilers and pressure devices are specified in Table 6.
Table 6
Ordinal number
Inspected objects
Calculation unit
Capacity
Charge rates (in VND thousand)
1
Boilers
...
...
...
Under 0.5
300
Between 0.5 and 1
500
...
...
...
Between over 1 and 2
1,000
Between over 2 and 4
1,500
...
...
...
Between over 4 and 6
1,800
Between over 6 and 10
2,200
...
...
...
Between over 10 and 25
4,000
Between over 25 and 75
6,000
...
...
...
Between over 75 and 125
8,000
Between over 125 and 200
13,000
...
...
...
Between over 200 and 400
18,000
Over 400
22,000
2
Pressure vessels
...
...
...
Under 1
150
Between 1 and 2
300
...
...
...
Between over 2 and 5
400
Between over 5 and 10
600
...
...
...
Between over 10 and 25
800
Between over 25 and 50
1,000
...
...
...
Between over 50 and 100
2,500
Between over 100 and 500
4,000
...
...
...
Over 500
6,000
3
Gas bottles
Bottle
Standard bottle
60
...
...
...
Non-standard bottle
80
4
Cold system
1,000 kcal/h
Under 30
1,000
...
...
...
Between 30 and 50
1,500
Between over 50 and 100
2,000
...
...
...
Between over 100 and 250
2,500
Between over 250 and 1,000
3,000
...
...
...
Over 1,000
4,000
5
Gas regulating and charging systems
System
System with 20 charging gates or under
2,000
...
...
...
Systems with 21 charging gates or more
3,000
6
Assorted pipelines, excluding solvents
meter
Diameter of 150 mm or under
10
...
...
...
Diameter of over 150 mm
15
VII. CHARGES FOR INSPECTION OF THE QUALITY OF EQUIPMENT AND SUPPLIES BY NON-DESTRUCTION METHODS
1. The charge rates for inspection of the quality of equipment and supplies by non-destruction methods are specified in Table 7.
Table 7
Ordinal number
Inspecting, measuring and testing methods
Calculation unit
...
...
...
1
Measuring the materials' thickness
Measuring point
8
2
Scanning defects by ultrasound
Meter of welding line
80
...
...
...
VIII. CHARGES FOR EXAMINATION OF WELDERS AND NON-DESTRUCTION TESTERS
The charge rates for examination and granting or extension of welder's or non-destruction tester's certificates are specified in Table 8.
Table 8
Ordinal number
Examined or certified subjects
First-time exam
Extension
1
Welders
...
...
...
200
2
Non-destruction testers
600
300
- 1Decision No.791/2001/QD-BGTVT, promulgated by the Ministry of Transport and Communications for the charter on organization and operation of the Vietnam register.
- 2Decision No. 75-TTg of DFebruary 03, 1997, of the prime minister on the tasks, powers and organizational structure of the Vietnam registration and inspection department
- 1Decree of Government No.86/2002/ND-CP of prescribing the functions, tasks, powers and organizational structures of the ministries and ministerial-level agencies
- 2Decree No. 57/2002/ND-CP of June 3, 2002, of detailing the implementation of the ordinance on charges and fees
- 3Ordinance No. 38/2001/PL-UBTVQH10 of August 28, 2001 , on charges and fees.
- 4Decision No.791/2001/QD-BGTVT, promulgated by the Ministry of Transport and Communications for the charter on organization and operation of the Vietnam register.
Decision No. 12/2003/QD-BTC of January 24, 2003, promulgating the rates of charges for inspection of the technical safety and quality of equipment and supplies falling under the scope of supervision by Vietnam registry
- Số hiệu: 12/2003/QD-BTC
- Loại văn bản: Quyết định
- Ngày ban hành: 24/01/2003
- Nơi ban hành: Bộ Tài chính
- Người ký: Trần Văn Tá
- Ngày công báo: Đang cập nhật
- Số công báo: Đang cập nhật
- Ngày hiệu lực: Kiểm tra
- Tình trạng hiệu lực: Kiểm tra